LED Strip Light,LED Display Signs,LED Modules,LED Accessories Showroom Located in Toronto Canada

NES-200-12 Meanwell 12V 200W LED Power Supply UL CSA

NES-200-12 Meanwell 12V 200W LED Power Supply UL CSA

  • Model: NES-200-12
  • 0 Units in Stock

Sold Out

Meanwll NES-200-12 LED Power Supply Driver UL ULc

This switch power supply output 12v DC max power 204W, it is popular used in many different application, like LED Display Signs, It is UL ad ULc recognized


Download Data Sheet

  • AC input range selectable by switch
  • Protections: Short circuit / Overload / Over voltage/Over temperature
  • Cooling by free air convection
  • Withstand 300vac surge input for 5 second
  • Built-in constant current limiting circuit
  • 100% full load burn-in test
  • LED indicator for power on
  • Fixed switching frequency at 90KHz
  • Low cost,high reliability
  • 2 years warranty

PART # 04022
Type NES-200-12
DC Voltage 12V
Rated Current 17A
Current Range 0 ~ 17A
Rated Power 204W
Ripple & Noise (max.)150mVp-p
Voltageeadj. Range 10 ~ 13.5V
Voltage Tolerance±1.0%
Line Regulation±0.5%
Load Regulation ±0.5%
Setup,Rise Time 1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load
Hold Uptime (Typ.)20ms/230VAC 16ms/115VAC at full load
Voltage Range90 ~ 132VAC / 180 ~ 264VAC by switch 254 ~ 370VDC
Frequency Range 47 ~ 63Hz
Efficiency(Typ.) 85%
AC Current(Typ.)4.5A/115VAC 2.5A/230VAC
Inrush Current(max.)40A/115VAC 55A/230VAC
Leakage Current<3.5mA/ 240VAC
Over Load105 ~ 150%rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Over Voltage 13.8 ~ 16.2V
Protection type:Shut down o/p voltage,re-power on to recover
Over Temperature85℃±5℃
Protection type:Shut down O/Pvoltage, recovers automatically after temperature goes down
Working Temp.-20 ~ +50℃(Refer to output load derating curve)
Working Humidity20 ~ 90% RH non-condensing
Storage Temp.,Humidity-20 ~ +85℃, 10 ~ 95% RH
Temp.Coefficient±0.03%/℃(0 ~ 50℃)
Vibration10 ~ 500Hz, 3G 10min./1cycle,60min.each along X,Y,Z axes
SafetystandardsUL60950-1 approved
Withstand VoltageI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
MTBF271.9Khrs min. MIL-HDBK-217F (25℃)
Dimension215*115*50mm (L*W*H)
  1. All parameters NOT specially mentioned are easured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. Please connect positive pole of input voltage with mark "N" of terminal block, connect negative pole of input voltage with mark "L" of terminal block, using DC voltage for input voltage.

Customer Write Reviews

Choose a ranking for this item. 1 star is the worst and 5 stars is the best.

NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed