LED Strip Light,LED Display Signs,LED Modules,LED Accessories Showroom Located in Toronto Canada



APC-16-350 Meanwell 16W 350mA LED Driver UL Class 2

APC-16-350 Meanwell 16W 350mA LED Driver UL Class 2

$16.60
  • Model: APC-16-350
  • Weight: 0.1kg
  • 993 Units in Stock

  • Quantity:    Leave A Message


  • Description

    APC-16-350 Meanwell 16W 350mA LED Driver UL Class 2

    Features

    Download Data Sheet

    • Constant Current design
    • Universal AC input / Full range
    • Protections: Short circuit / Over voltage
    • Fully isolated plastic case
    • Small and compact size
    • Cooling by free air convection
    • Class Ⅱ power unit,no FG
    • Class 2 power unit
    • Pass LPS
    • IP30 design
    • Suitable for LED lighting and moving sign applications
    • 100% full load burn-in test
    • Low cost, high reliability
    • 2 years warranty

    SPECIFICATIONS
    Meanwell Model# APC-16-350
    Rated Current350mA
    DC Voltage Range 12 ~ 48V
    Rated Power16.8W
    Ripple & Noise (max.)300mVp-p
    Voltage Tolerance±5.0%
    Current Accuracy±8.0%
    Line Regulation±1.0%
    Load Regulation±3.0%
    Setup,Rise Time 3000ms, 200ms/230VAC 3000ms,200ms/115VAC at full load
    Hold Uptime (Typ.)20ms/230VAC 12ms/115VAC at full load
    Voltage Range90 ~ 264VAC 127 ~ 370VAC
    Frequency Range 47 ~ 63Hz
    Efficiency(Typ.)84%
    AC Current(Typ.)0.3A/230VAC;0.5A/115VAC
    Inrush Current(max.)Cold Start 35A/115VAC 70A/230VAC
    Leakage Current0.25mA/ 240VAC
    Over Voltage50.4 ~ 60V
    Protection type:Shut off o/p voltage,clamping by zener diode
    Working Temp.-30 ~ +70℃(Refer to "Derating Curve")
    Working Humidity20 ~ 90% RH non-condensing
    Storage Temp.,Humidity-40 ~ +80℃, 10 ~ 95% RH
    Temp.Coefficient±0.2%/℃(0 ~ 50℃)
    Vibration10 ~ 500Hz, 2G 10min./1cycle,period for 60min.each along X,Y,Z axes
    Safetystandards UL8750,CSAC22.2 No.250.0-08(except APC-16-350)approved;design refer toTUV EN60950-1
    Withstand VoltageI/P-O/P:3.75KVAC
    Isolation ResistanceI/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
    Emc EmissionCompliance to EN55015 ,EN61000-3-2 ClassA,EN61000-3-3
    Emc ImmunityCompliance to EN61547,EN61000-4-2,3,4,5,6,8,11,light industry level(surge 2KV),criteriaA
    MTBF1145.7Khrs min. MIL-HDBK-217F (25℃)
    Dimension77*40*29mm (L*W*H)
    Packing0.1Kg;120pcs/14Kg/0.93CUFT
    1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
    3. Tolerance : includes set up tolerance, line regulation and load regulation.
    4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
    5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
    6. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.


    Customer Write Reviews

    Choose a ranking for this item. 1 star is the worst and 5 stars is the best.

    NOTE: HTML tags are not allowed.
    NOTE: Reviews require prior approval before they will be displayed