LED Strip Light,LED Display Signs,LED Modules,LED Accessories Showroom Located in Toronto Canada



APC-12-350 Meanwell 12W 350mA LED Driver UL Class 2

APC-12-350 Meanwell 12W 350mA LED Driver UL Class 2

$13.90
  • Model: APC-12-350
  • Weight: 0.08kg
  • 0 Units in Stock

Sold Out


Description

APC-12-350 Meanwell 12W 350mA LED Driver UL Class 2

Features

Download Data Sheet

  • Constant Current design
  • Universal AC input / Full range
  • Protections: Short circuit / Over voltage
  • Fully isolated plastic case
  • Small and compact size
  • Cooling by free air convection
  • Class Ⅱ power unit,no FG
  • Class 2 power unit
  • Pass LPS
  • IP30 design
  • Suitable for LED lighting and moving sign applications
  • 100% full load burn-in test
  • Low cost, high reliability
  • 2 years warranty

SPECIFICATIONS
Meanwell Model#  APC-12-350
Rated Current350mA
DC Voltage Range 9 ~ 36V
Rated Power 12.6W
Ripple & Noise (max.) 300mVp-p
Voltage Tolerance±5.0%
Current Accuracy±8.0%
Line Regulation±1.0%
Load Regulation±3.0%
Setup,Rise Time 3000ms, 180ms/230VAC 3000ms,150ms/115VAC at full load
Hold Uptime (Typ.)20ms/230VAC 15ms/115VAC at full load
Voltage Range90 ~ 264VAC 127 ~ 370VAC
Frequency Range 47 ~ 63Hz
Efficiency(Typ.)82%
AC Current(Typ.)0.2A/230VAC;0.35A/115VAC
Inrush Current(max.)Cold Start 35A/115VAC 70A/230VAC
Leakage Current0.25mA/ 240VAC
Over Voltage 39.6 ~ 46.8V
Protection type:Shut off o/p voltage,clamping by zener diode
Working Temp.-30 ~ +70℃(Refer to "Derating Curve")
Working Humidity20 ~ 90% RH non-condensing
Storage Temp.,Humidity-40 ~ +80℃, 10 ~ 95% RH
Temp.Coefficient±0.2%/℃(0 ~ 50℃)
Vibration10 ~ 500Hz, 2G 10min./1cycle,period for 60min.each along X,Y,Z axes
SafetystandardsUL8750,CSAC22.2 No.250.0-08 approved;design refer toTUV EN60950-1
Withstand VoltageI/P-O/P:3.75KVAC
Isolation ResistanceI/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
Emc EmissionCompliance to EN55015 ,EN61000-3-2 ClassA,EN61000-3-3
Emc ImmunityCompliance to EN61547,EN61000-4-2,3,4,5,6,8,11,light industry level(surge 2KV),criteriaA
MTBF1145.7Khrs min. MIL-HDBK-217F (25℃)
Dimension77*40*29mm (L*W*H)
Packing0.08Kg;120pcs/11.8Kg/0.93CUFT
  1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
  5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
  6. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.


Customer Write Reviews

Choose a ranking for this item. 1 star is the worst and 5 stars is the best.

NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed